Beadsmith-Vintaj Steel Bench Block, 4 by 4 by 0.5-Inch


Beadsmith V-BB44 - The ideal surface for letter imprinting; riveting; texturing and hammering. Beadsmith-vintaj: Steel Bench Block. Never mar your craft table again. Contains one 4x4x1/2 inch Bench Block. The ideal surface for letter imprinting; riveting; texturing and hammering- you never have to worry about marring your craft table again! This package contains one 4x4x1/2 inch Bench Block.

. Imported.

More information about Beadsmith V-BB44

Cousin 4472 Craft and Jewelry Mini Hammer, 6-Inch


Cousin 4472 - Fits in your hand comfortably. Fits in your hand comfortably. Weighted sturdy head.

More information about Cousin 4472


Similar products



Beadalon Rubber Bench Block for Jewelry Making, 4 by 4-Inch, Black


Beadalon 228S-220 - Take care when hammering on the rubber block as the energy from the hammer will transfer back to the hammer. 4" x 4" x 1" 102 cm x 2. 5 cm. Weighted sturdy head. Fits in your hand comfortably. Use this block under a traditional steel bench block to absorb the shock from striking the steel block with a hammer. The rubber bench block can also be used by itself to limit the amount of marring on the front side of wire or sheet.

Rubber bench can also be used when hammering on metal sheets. Great for absorbing the shock from striking the steel block. Great for travel and or use at home.

More information about Beadalon 228S-220


Similar products



Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing.


Bastex W2: TL56 STAMP HAMMER - The brass head of this hammer provides a soft but strong striking surface elimination double impressions. Striking metal stamps with a regular hammer or other tools not made specifically for metal stamping can take its toll on your artwork and the longevity of your stamps themselves. Great for travel and or use at home.

Great for absorbing the shock from striking the steel block. Fits in your hand comfortably. The hammer can be used on a standard work table but we highly suggest using a small anvil or steel bench block. Quality: the brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job.

Bastex 1 Pound Brass Metal Stamping Hammer. Short Handle Design with Flat Mallet Head for Jewelry Making and Personalizing. - Weighted sturdy head. This hammer is great for the beginner and intermediate stamper. Brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow. Sturdy and grooved grip allows for maximum and precise strikes. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time.

Helps to prevent double impressions and protects the longevity of your stamps. General usage: the brass 1 pound metal stamping hammer was designed for metal stamping.

More information about Bastex W2: TL56 STAMP HAMMER


Similar products



ImpressArt 1 Pound Metal Stamping Hammer


ImpressArt SC711 - Sturdy and grooved grip allows for maximum and precise strikes. Impressart's metal stamping hammer is the first hammer ever to be designed specifically for metal stamping. This hammer is great for the beginner and intermediate stamper. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank.

Size & dimensions: hammer head is about 1 pound in weight and grip is about 7 inches in length. Warranty: includes 30 day money back guarantee and 1 year replacement Warranty. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. Great for travel and or use at home.

ImpressArt 1 Pound Metal Stamping Hammer - Quality: the brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job. Great for absorbing the shock from striking the steel block. The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow.

Precision: because of it's scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. General usage: the brass 1 pound metal stamping hammer was designed for metal stamping.

More information about ImpressArt SC711


Similar products



ImpressArt Stamp Straight Tape


ImpressArt SC21-532 - Now all of your stamps will line up perfectly. Great for absorbing the shock from striking the steel block. Stamp straight Tape allows precise accuracy when stamping letters on metal jewelry. The head is firmly attached to the handle. Simply create a straight line with the top edge of the tape along your workpiece to create a guide.

Helps to prevent double impressions and protects the longevity of your stamps. First ever hammer designed specially for metal stamping. Weighted sturdy head. To help evenly space out your letters, mark your Stamp Straight Tape with a pen where each letter will be stamped. Lightly place stamp on disc and drag it towards the edge of the tape until you feel the bottom of the stamp catch the edge.

ImpressArt Stamp Straight Tape - Brass head prolongs the life of your metal stamps. Fits in your hand comfortably. 1 pound brass head creates crisp even impressions while prolonging the life of your metal stamps. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow.

Precision: because of it's scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Also works great for flattening wire for jewelry making.

More information about ImpressArt SC21-532


Similar products



HimaPro One Pound Brass Metal Stamping Hammer with a complimentary ❤ Stamp


Hima Products - Sturdy and grooved grip allows for maximum and precise strikes. It has a smaller and scaled down grip designed for easy handling and precision striking. 1 pound brass head creates crisp even impressions. Brass hammer is a better choice than steel hammer for metal stamping because it forwards the energy of strike into the stamping blank without bouncing back.

A heart designed ❤ stamp 6mm, 1/4" included as a gift. Buy with 100% confidence and satisfaction: 60 day money back guarantee. Great for absorbing the shock from striking the steel block. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. Quality: the brass head helps to prolong the life of your metal stamps by reducing wear and tear through each jewelry or customizing job.

HimaPro One Pound Brass Metal Stamping Hammer with a complimentary ❤ Stamp - Brass head prolongs the life of your metal stamps. Helps to prevent double impressions and protects the longevity of your stamps. Himapro brass stamping hammer is designed for metal stamping. General usage: the brass 1 pound metal stamping hammer was designed for metal stamping. Rubber bench can also be used when hammering on metal sheets.

Weighted sturdy head.

More information about Hima Products


Similar products



ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer 1 Pound


ImpressArt SC721 - Great for travel and or use at home. Great for absorbing the shock from striking the steel block. Its weighted brass head and ergonomic features help achieve evenly stamped impressions. This is by design and will not affect the quality of your stamping. 1 pound brass head creates crisp even impressions. Helps to prevent double impressions and protects the longevity of your stamps.

The head is firmly attached to the handle. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow. Precision: because of it's scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings.

ImpressArt Brass Head Ergo-Angle Metal Stamping Hammer 1 Pound - Rubber bench can also be used when hammering on metal sheets. Brass head prolongs the life of your metal stamps. 1 lb one pound top-weighted, ideal for deep, crisp markings. The ergo-angle metal stamping Hammer is a signature ImpressArt tool and an important asset contributing to elevated jewelry stamping. The development of the ergo-angle hammer involved a series of field tests performed by ImpressArt Certified Bench Jewelers, who have identified the optimal striking angle and holding points for precision and comfort when working with metal stamps.

The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time. First ever hammer designed specially for metal stamping.

More information about ImpressArt SC721


Similar products



Bastex Steel Heart Punch Tool for Customizing Jewelry, Clay Art, Leathers and Other DIY Projects


Bastex W2: Z58 6MM 1/4" HEARTPUNCH 1PC ALE - Note: before use, tighten brass head with pliers to ensure it's secure on hammer. How to use: place the metal stamp onto the material you wish to personalize, be sure to check this is the correct spot for striking. The head is also made of the same construction so you should get a beautiful heart every time.

Precision - every stamp is precisely machined to ensure all stamps are correctly weighted and the heart head gives the proper indention when used onto your project. Contents - includes: 1 heart Punching Stamp and measures: 6 MM 1/4. The 1 pound head and grooved grip helps to strike your metal stamps with the exact amount of force every single time.

Bastex Steel Heart Punch Tool for Customizing Jewelry, Clay Art, Leathers and Other DIY Projects - Use with a basic hammer to permanently engrave the beautiful heart sentiment onto your crafts and DIY projects. Helps evenly Space Out Letters. Extra tip: if you are using a metal fill in with a permanent marker to accentuate. Weighted sturdy head. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank.

Size & dimensions: hammer head is about 1 pound in weight and grip is about 7 inches in length. Warranty: includes 30 day money back guarantee and 1 year replacement Warranty. 1 lb one pound top-weighted, ideal for deep, crisp markings.

More information about Bastex W2: Z58 6MM 1/4" HEARTPUNCH 1PC ALE


Similar products



AmazonBasics Metal and Leather Stamp Kit - 5/32-Inch


AmazonBasics AMZ1716 - These attributes reduce wear outs and insures these stamps are long lasting. General usage - great for permanently marking metals, plastics, leather and wooden items. Also works great for flattening wire for jewelry making. Helps evenly Space Out Letters. It has a smaller and scaled down grip designed for easy handling and precision striking.

Fits in your hand comfortably. Brass is much better than steel for metal stamping because it disperses the energy of the hit into the stamping blank. Size & dimensions: hammer head is about 1 pound in weight and grip is about 7 inches in length. Warranty: includes 30 day money back guarantee and 1 year replacement Warranty.

AmazonBasics Metal and Leather Stamp Kit - 5/32-Inch - . The head is firmly attached to the handle. The head is also made of the same construction so you should get a beautiful heart every time. Precision - every stamp is precisely machined to ensure all stamps are correctly weighted and the heart head gives the proper indention when used onto your project. Contents - includes: 1 heart Punching Stamp and measures: 6 MM 1/4.

Stamp kit for creating permanent hand-stamped imprints; 5/32-inch character height. This hammer is great for the beginner and intermediate stamper.

More information about AmazonBasics AMZ1716


Similar products



ImpressArt- Whimsy Heart Design Stamp, 3mm


ImpressArt SC158-K-3MM - 1 pound brass head creates crisp even impressions. Stamp kit for creating permanent hand-stamped imprints; 5/32-inch character height. Impression Size: 3mm. Great for travel and or use at home. Made of plated steel - oil free, prevents rust. The head is also made of the same construction so you should get a beautiful heart every time.

Precision - every stamp is precisely machined to ensure all stamps are correctly weighted and the heart head gives the proper indention when used onto your project. Contents - includes: 1 heart Punching Stamp and measures: 6 MM 1/4. Please note that brass hammers may flake when striking however this lengthens the life of the stamp by taking the brunt of the hammer blow.

ImpressArt- Whimsy Heart Design Stamp, 3mm - Precision: because of it's scaled down grip and 1 pound brass head every strike will be more accurate resulting in a much better craft and customization of your jewelry or leather workings. Wooden storage box included; backed by an AmazonBasics limited 1-year warranty. These attributes reduce wear outs and insures these stamps are long lasting.

. Sturdy and grooved grip allows for maximum and precise strikes. Brass hammer is a better choice than steel hammer for metal stamping because it forwards the energy of strike into the stamping blank without bouncing back. A heart designed ❤ stamp 6mm, 1/4" included as a gift.

More information about ImpressArt SC158-K-3MM


Similar products