DELTA 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2 Inch Chisel and Bit Sets

#ad
#ad
Delta 17-924 #ad - Use it with delta models 11-980, 11-990, 14-070 & 17-900 drill presses and 11-090 radial drill press; and Sears model 21313, 21315 & 21317 drill presses. Mortising attachment comes with four popular mortising chisel and bit sets. Offers large 4-inch capacity under hold-downs, 2-3/4-inches from ends of hook rods to fence.

Also fits drill presses with quill diameters of 66-milimeters, 508-milimeters, 48-milimeters, and 38-milimeters. The delta mortising attachment will only fit the below models:. Use it with delta models 11-980, 14-070 & 17-900 drill presses and 11-090 radial drill press; and Sears's model 21313, 11-990, 21315 & 21317 drill presses.

DELTA 17-924 Mortising Attachment with 1/4 Inch, 5/16 Inch, 3/8 Inch, and 1/2 Inch Chisel and Bit Sets #ad - 1/4-inch, 3/8-inch, 5/16-inch, and 1/2-inch set. Also includes a handy carrying case that holds everything for easy storage. Can’t fit a square peg in a round hole? drill a new one! The Delta 17-924 Mortising Attachment attaches to your dress press and turns it into a mortising machine. Includes four popular mortising chisel and bit sets and convenient carrying case along with attachment.

More information about Delta 17-924 #ad

Woodstock D2844 Mortising Chisel, 3/4-Inch

#ad
#ad
WOODSTOCK D2844 #ad - Woodstock D2844 Mortising Chisel, 3/4-Inch #ad - 1/2-inch Wide. 3/4" wide. These mortising chisels are great for drilling square holes in wood with a mortising machine or a mortising attachment not included.

More information about WOODSTOCK D2844 #ad


Similar products



DELTA 34-184 Universal-Deluxe Tenoning Jig

#ad
#ad
Delta 34-184 #ad - The jig handles up to 3-1/4-inch thick stock and features a quick-release hold down clamp for efficient work. It is made of durable, cnc precision milled cast iron, and can be used with both right and left tilt saws. The jig measures 11. 8 x 12 x 8. 2 inches and weighs 21. 3 pounds. With two ergonomic handles, you'll be able to make smooth cuts every time easily and comfortably.

Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work. The jig can be adjusted from 45 to 90 degrees with adjustable positive stops, and there's a micro-fine adjustment knob for fine width-of-cut settings down to 4/1000-inch.

DELTA 34-184 Universal-Deluxe Tenoning Jig #ad - The delta 34-184 is designed to work with any table saw with a 3/8-inch by 3/4-inch miter slot, standard on almost all table saws. 3/4" wide. 1/2-inch Wide. Adjustable 90 degree positive stop for accurate repetitive cuts. By pushing a button, you can make for macro adjustments. 90 degree-45 degree backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock.

. When you need perfect, tight joints, the DELTA 34-184 Universal-Deluxe Tenoning Jig will give you professional results every time.

More information about Delta 34-184 #ad


Similar products



Delta 18-901 Biesemeyer Drill Press Fence, 24-Inch

#ad
#ad
Delta Power Equipment Corporation 18-901 #ad - Adjustable 90 degree positive stop for accurate repetitive cuts. 1/2-inch Wide. Fits most drill presses with "T" slots or thru holes. Biesemeyer deluxe Drill Press Fence. 90 degree-45 degree backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. Can be positioned high/low for different applications.

. Adjustable stop for repetative work. Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots. Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work. Has ergonomic handles, quick release coarse adjustment, micro adjustment to.

Delta 18-901 Biesemeyer Drill Press Fence, 24-Inch #ad - 004-inch. 3/4" wide.

More information about Delta Power Equipment Corporation 18-901 #ad


Similar products



Robert Larson Co. 605-1250 Beechwood Mortise/Marking Gauge

#ad
#ad
Robert Larson Co 605-1250 #ad - 1/2-inch Wide. Can be positioned high/low for different applications. Dual-sided. 3/4" wide. Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots. 7 ¾-inches in length. Fully adjustable. Highest quality Beechwood has brass wear strips on the rubbing face. Has ergonomic handles, quick release coarse adjustment, micro adjustment to.

004-inch. 90 degree-45 degree backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. Device for general and mortise marking. 1 side is for marking mortices and has a sliding adjustment mechanism. Thumbscrew locking mechanism. Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work.

Robert Larson Co. 605-1250 Beechwood Mortise/Marking Gauge #ad - The other side has a single pin which allows the tool to be used as a traditional marking gauge. Adjustable stop for repetative work. The product is manufactured in United Kingdom. Overall size is approximate 7-3/4". Fits most drill presses with "T" slots or thru holes.

More information about Robert Larson Co 605-1250 #ad


Similar products



POWERTEC 71009 Safety Push Block and Stick Package, 5-Piece

#ad
#ad
Southern Technology LLC 71009 #ad - Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work. Prevents kickback and protects hands and fingers from sharp cutting blades. Essential safety protection to use router table, band saw, shaper, table saw and jointer.

1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick; total of 5 pieces. Adjustable stop for repetative work. Set includes: 1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick. Dual-sided. The rubber soles of these accessories securely hold your work pieces, as you guide them into the cutting blades.

POWERTEC 71009 Safety Push Block and Stick Package, 5-Piece #ad - Adjustable 90 degree positive stop for accurate repetitive cuts. 1/2-inch Wide. 7 ¾-inches in length. Made from quality beechwood/brass wear strips on rubbing face. Fully adjustable. The powertec 5-piece safety package provides the key components to ensure the safety and protection of professional and hobby woodworkers alike.

90 degree-45 degree backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.

More information about Southern Technology LLC 71009 #ad


Similar products



Delta 18-900L 18-Inch Laser Drill Press

#ad
#ad
Delta 18-900L #ad - The accurate class iiia laser is built with a high quality less than 5mw laser that operates with precision cross hairs that mark the drilling point. Adjustable 90 degree positive stop for accurate repetitive cuts. Table insert: 3. 75 x 3. 75 x 075 inches. Device for general and mortise marking. Adjustable stop for repetative work.

Auto-tensioning belt drive system allows for fast and easy speed changes while maximizing transmission efficiency. The delta 18-900L 18 in. Made from quality beechwood/brass wear strips on rubbing face. Ideal for woodworking, it's designed to provide the accuracy and precision you need to get the job done right the first time.

Delta 18-900L 18-Inch Laser Drill Press #ad - 1/2-inch Wide. Orange color ensures high visibility. Fully adjustable twinlaser projects a bright red crosshair on the work piece at the point of bit contact. 3/4" wide. Laser drill Press features a rugged design for professional use. Fully adjustable. Full 6-inch quill stroke for deeper drilling applications and best-in-class capacity.

More information about Delta 18-900L #ad


Similar products



WEN 4214 12-Inch Variable Speed Drill Press

#ad
#ad
WEN 4214 #ad - Base has predrilled holes for mounting onto a bench or work stand. Mechanical variable speed delivers equal torque throughout the range. The 5/8” chuck with mt2 spindle taper gives you versatility with a variety of bits and features on-board chuck key storage, so you never have to hunt around for it. 7 ¾-inches in length.

Fits most drill presses with "T" slots or thru holes. Table insert: 3. 75 x 3. 75 x 075 inches. Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots. Backed by a five-year warranty. Since 1951, wen has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project.

WEN 4214 12-Inch Variable Speed Drill Press #ad - Prevents kickback and protects hands and fingers from sharp cutting blades. 1/2-inch Wide. Max drill capacity is 5/8” in 1” thick cast iron. Motor: 120 v, 60 Hz. A versatile and valuable tool for any shop especially when you expand its range of use with optional accessories such as mortising attachments, drum sanders, circle cutters, etc.

More information about WEN 4214 #ad


Similar products



DELTA 20-619 6-Inch Drill Press Vise

#ad
#ad
Delta 20-619 #ad - Motor: 120 v, 60 Hz. Table insert: 3. 75 x 3. 75 x 075 inches. A final tightening can be done with a turn of the crank handle. Full 6-inch quill stroke for deeper drilling applications and best-in-class capacity. 3/4" wide. Can be positioned high/low for different applications. Slots make it easy to mount to drill press tables.

Fits most drill presses with "T" slots or thru holes. Includes drill press, laser, mechanical variable speed, 5/8" keyed chuck & key, table roller extension, tools for assembly. Holds material up to 6-inch wide. Mechanical variable speed delivers equal torque throughout the range. Made from quality beechwood/brass wear strips on rubbing face.

DELTA 20-619 6-Inch Drill Press Vise #ad - Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots. Thru-holes for jaw plates. Led read out displays speed. Spindle travel of 3-1/8" with easy to read, locking linear depth stop for accurate and repeatable drilling operations. 9-1/2 x 9-1/2" cast iron worktable features rack & pinion height adjustment and bevels up to 45 Degree left & right.

Laser module: Class III. Backed by a five-year warranty.

More information about Delta 20-619 #ad


Similar products



PORTER-CABLE PC1014 Forstner Bit Set, 14-Piece

#ad
#ad
PORTER-CABLE PC1014 #ad - Forstner bit, 1-1/2 in. Multi-position control levers for convenient easy adjustment; Better locking leverage, extra-large crank handle for fast, easy clamping of work. Table insert: 3. 75 x 3. 75 x 075 inches. Includes drill press, laser, 5/8" keyed chuck & key, mechanical variable speed, table roller extension, tools for assembly.

Holds material up to 6-inch wide. Device for general and mortise marking. Open tooth design for clean fast holes. Essential safety protection to use router table, band saw, shaper, table saw and jointer.1 long push block, 2 short push blocks, 1 safe V stick and 1 push stick; total of 5 pieces. Forstner bit, 1-1/8 in.

PORTER-CABLE PC1014 Forstner Bit Set, 14-Piece #ad - Thru-holes for jaw plates. 8-3/4-inch by 9-7/8-inch. Includes common sizes from 1/4 to 2 Inch. Tough, durable plastic design for long lasting use; Rubber soles firmly grip your workpiece. Motor: 120 v, 60 Hz. Has ergonomic handles, quick release coarse adjustment, micro adjustment to. 004-inch.

More information about PORTER-CABLE PC1014 #ad


Similar products



MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking Works with GRR-RIPPER

#ad
#ad
MICROJIG, Inc. TJ-5000 #ad - Precision taper cuts as accurate as 1/8 of a degree. Meanwhile, tapers can be cut from an infinite range between 0˚ to 10˚ with 1/8˚ incremental stops. Infinitely variable speed ranges from 580-3200 RPMS. Two independent MemoryLocks keeps angles for repeat taper cuts. Combine the microdial with your grr-ripPER Advanced Model Sold Seperately to enhance your safety and woodworking.

Quill diameter of 2. 17 inches. Prevents kickback and protects hands and fingers from sharp cutting blades. Micro-adjustable depth stops and independent depth scale allows the user to zero the scale and set up for repetitive drilling quickly and easily. Has ergonomic handles, quick release coarse adjustment, micro adjustment to.

MicroJig Tapering Jig for Table Saw, Router Table, and Band Saws for Woodworking Works with GRR-RIPPER #ad - 004-inch. Mechanical variable speed delivers equal torque throughout the range. The microdial tapering jig by mICROJIG helps you achieve cutting edge tapers. Slots make it easy to mount to drill press tables. Auto-tensioning belt drive system allows for fast and easy speed changes while maximizing transmission efficiency.

Device for general and mortise marking. Made from quality beechwood/brass wear strips on rubbing face.

More information about MICROJIG, Inc. TJ-5000 #ad


Similar products