DJI Ronin M Thumb Controller


DJI 6958265122545 - Capture shots that are difficult or impossible now, and start using your gimbal to its full potential. View your current status through clear OLED screen. Built-in rechargeable battery up to 18 hours of power per charge,. Quick Calibration onboard. Simple to setup and use, the dji ronin wireless Thumb Controller makes controlling your Ronin-M/Ronin-MX easier and more intuitive, even with only a single operator.

The thumb controller is perfectly compatible and ready to be used with Ronin-M. Quickly change the settings, speed, and direction of your gimbal.

More information about DJI 6958265122545

940-RON1 Black - Nanuk 940 Ronin M Waterproof Hard Case with Custom Foam Insert for DJI Ronin M Gimbal Stabilizer System


Nanuk 940-RON1 - Whether transporting your gear through the unforgiving Amazon jungle or across the planet’s most punishing terrain, every detail of NANUK durable hard sided cases has been refined and perfected to offer the utmost in protection and performance. Complemented by a large selection of optional accessories and customizable to an incredible degree, NANUK transportable cases are the best choice to move your equipment in complete security.

As a leader in injected molded equipment and industrial cases, Plasticase manufactures cases that are far superior in quality, performance and style than the competition. Interior dimensions l200 x w14. 0 x h8. 0 inches, exterior dimensions l21. 7 x w16. 9 x h8. 5 inches. Waterproof ip67 rated, dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling.

940-RON1 Black - Nanuk 940 Ronin M Waterproof Hard Case with Custom Foam Insert for DJI Ronin M Gimbal Stabilizer System - Nk-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey. These virtually indestructible, lightweight, protective watertight cases offer the ultimate grade of protection in a variety of sizes, configurations and colors. We stand behind our NANUK durable transportable cases and we guarantee them for life.

More information about Nanuk 940-RON1


Similar products



Red Knob - CAMVATE Light Mount Stand Bracket 25mm Rod Clamp Holder for DJI Ronin-M, Freefly MoVI


CAMVATE 4332011302 - Two powerclaw patented triple action latches molded in super-tough Nylon keep the case securely closed using compressive force | lockable with optional TSA padlocks. Nanuk 940 hard case fitted with a 2 level foam insert designed to fit and protect the DJI Ronin M stabilizer and accessories | Foam insert is compatible with previous Ronin M models | DJI Ronin M and accessories not included.

Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M. Interior dimensions l200 x w14. 0 x h8. 0 inches, exterior dimensions l21. 7 x w16. 9 x h8. 5 inches. Waterproof ip67 rated, dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling. Nk-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey.

Red Knob - CAMVATE Light Mount Stand Bracket 25mm Rod Clamp Holder for DJI Ronin-M, Freefly MoVI - This product is made of High Quality Machined, Anodized In Black. It can mount your led linght or the device with hot shoe base on DJI Ronin-M. Limited lifetime warranty on NANUK 940 case |1 year warranty against manufacturing defects on the foam inserts.

More information about CAMVATE 4332011302


Similar products



1766 - SMALLRIG 1.97" Tilt Bar Extension Rods Bar for DJI Ronin and DJI Ronin-M


SMALLRIG 1766 - Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M. Interior dimensions l200 x w14. 0 x h8. 0 inches, exterior dimensions l21. 7 x w16. 9 x h8. 5 inches. Waterproof ip67 rated, dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling. Nk-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey.

Limited lifetime warranty on NANUK 940 case |1 year warranty against manufacturing defects on the foam inserts. Includes: rod *2 net weight: 29g nanuk 940 hard case fitted with a 2 level foam insert designed to fit and protect the DJI Ronin M stabilizer and accessories | Foam insert is compatible with previous Ronin M models | DJI Ronin M and accessories not included.

1766 - SMALLRIG 1.97" Tilt Bar Extension Rods Bar for DJI Ronin and DJI Ronin-M - . This product is made of High Quality Machined, Anodized In Black. It can mount your led linght or the device with hot shoe base on DJI Ronin-M. Smallrig tilt bar extension rods for ronin-m 1766 is sturdy and lightweight aluminum alloy 16mm rods with M14 female and male thread on ends. It adds 1. 97" of length to the vertical adjustment arms located on both side of the Ronin-M's camera baseplate.

The extended bars allow you to easily slide your camera lower on the Ronin-M's cradle for balancing a heavier camera or lens combination.

More information about SMALLRIG 1766


Similar products



SMALLRIG 25mm Rod Support Feet Landing Gear Feet for DJI Ronin-M/Ronin-MX Grip/Freefly MoVI Ring - 1914


SMALLRIG 1914-SR - Limited lifetime warranty on NANUK 940 case |1 year warranty against manufacturing defects on the foam inserts. Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M. Features cold shoe for external accessories, you can mount a SmallRig Articulating Arm 1497 to hold a monitor. Smallrig tilt bar extension rods for ronin-m 1766 is sturdy and lightweight aluminum alloy 16mm rods with M14 female and male thread on ends.

It adds 1. 97" of length to the vertical adjustment arms located on both side of the Ronin-M's camera baseplate. The extended bars allow you to easily slide your camera lower on the Ronin-M's cradle for balancing a heavier camera or lens combination. Includes: Rod *2. Pads at the bottom are anti-sliding 4. Cold shoe attaches magic arm and then attach monitor 3.

SMALLRIG 25mm Rod Support Feet Landing Gear Feet for DJI Ronin-M/Ronin-MX Grip/Freefly MoVI Ring - 1914 - Please note: wingnut or screws could be applied to secure the feet as per your need. This product is made of High Quality Machined, Anodized In Black. It can mount your led linght or the device with hot shoe base on DJI Ronin-M. 25mm rod clamp locks ronin M/MX Grip/MOVI Ring 2.

More information about SMALLRIG 1914-SR


Similar products



Neewer Field Monitor Mount with 1/4-inch Screw and 360-Degree Rotatable for DJI Ronin-M Handheld Gimbal, Fit All Rods with Diameter 24.9mm-25.5mm


Neewer 10091302 - Compatibility: compatible with DJI Ronin-M, Freefly MOVI. Descriptions: it can be installed on any round rod / pipe with the diameter of 24. 9mm - 25. 5mm. Smallrig tilt bar extension rods for ronin-m 1766 is sturdy and lightweight aluminum alloy 16mm rods with M14 female and male thread on ends. It adds 1. 97" of length to the vertical adjustment arms located on both side of the Ronin-M's camera baseplate.

The extended bars allow you to easily slide your camera lower on the Ronin-M's cradle for balancing a heavier camera or lens combination. Includes: Rod *2. Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M. Specifications: Color: Black/Red Weight: 4. 60 ounces/130grams material: metal package content: 1 x field monitor mount nanuk 940 hard case fitted with a 2 level foam insert designed to fit and protect the DJI Ronin M stabilizer and accessories | Foam insert is compatible with previous Ronin M models | DJI Ronin M and accessories not included.

Neewer Field Monitor Mount with 1/4-inch Screw and 360-Degree Rotatable for DJI Ronin-M Handheld Gimbal, Fit All Rods with Diameter 24.9mm-25.5mm - Help to keep level when you set the rig down on the floor. Application: can be installed on any round rod / pipe with the diameter of 24. 9mm - 25. 5mm.

More information about Neewer 10091302


Similar products



DJI Ronin Accessories Grip for Ronin-M & Ronin-MX Ronin-M & Ronin-MX - Grip, Black CP.ZM.000374


DJI Europe B.V. CP.ZM.000374 - Lightweight: the mount weighs ONLY 4. 6 ounces/130 grams. Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M. Hold a ronin-m or ronin-MX more easily and lean it against vertical surfaces when not in use. Expansion screws available for personal optimization. Limited lifetime warranty on NANUK 940 case |1 year warranty against manufacturing defects on the foam inserts.

Smallrig 25mm rod support feet 1914 is exclusively designed for DJI Ronin M/MX Grip and Freely Movi Ring. Please note: wingnut or screws could be applied to secure the feet as per your need. The feet provide multiple 1/4'' threads and a 3/8'' thread, allowing you to attach quick release plate for tripod shooting.

DJI Ronin Accessories Grip for Ronin-M & Ronin-MX Ronin-M & Ronin-MX - Grip, Black CP.ZM.000374 - 360-degree rotation: ball head can be rotated 360 degree as you desire; With the 1/4-inch screw on top to mount DJI Ronin-M accessories. Interior dimensions l200 x w14. 0 x h8. 0 inches, exterior dimensions l21. 7 x w16. 9 x h8. 5 inches.

More information about DJI Europe B.V. CP.ZM.000374


Similar products



1138 - SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI


SMALLRIG 1138 - Limited lifetime warranty on NANUK 940 case |1 year warranty against manufacturing defects on the foam inserts. 4. Hold a ronin-m or Ronin-MX more easily. Compatibility: compatible with DJI Ronin-M, Freefly MOVI. Application: can be installed on any round rod / pipe with the diameter of 24. 9mm - 25. 5mm. Two powerclaw patented triple action latches molded in super-tough Nylon keep the case securely closed using compressive force | lockable with optional TSA padlocks.

2. The payload is 5kg, if you intend to use a heavy camera Sony FS5 or Canon C200 on your gimbal stabilizer, please use the Allen Wrench instead of Wingnuts to tighten the feet. Please note: wingnut or screws could be applied to secure the feet as per your need. This product is made of High Quality Machined, Anodized In Black.

1138 - SMALLRIG Cool Ballhead Arm Super Clamp Mount Multi-Function Double Ball Adapter with Bottom Clamp for Ronin-M, Ronin MX, Freefly MOVI - It can mount your led linght or the device with hot shoe base on DJI Ronin-M. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable. It can lock the rod on the cage via the clamp tightened by the locking knob. Features cold shoe for external accessories, you can mount a SmallRig Articulating Arm 1497 to hold a monitor.

Can be installed on any 25mm round Rod / Pipe.

More information about SMALLRIG 1138


Similar products



SMALLRIG Quick Plate Mount for DJI Ronin Ronin-M Mini and Ronin MX - 1682


SMALLRIG COMINU050911 - This product is made of High Quality Machined, Anodized In Black. It can mount your led linght or the device with hot shoe base on DJI Ronin-M. Made of aluminum alloy, sturdy and durable. The feet come with four rubber pads on the bottom, which can effectively increase the friction for preventing from accidentally slipping.

360-degree rotation: ball head can be rotated 360 degree as you desire; With the 1/4-inch screw on top to mount DJI Ronin-M accessories. Smallrig 25mm rod support feet 1914 is exclusively designed for DJI Ronin M/MX Grip and Freely Movi Ring. Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M.

SMALLRIG Quick Plate Mount for DJI Ronin Ronin-M Mini and Ronin MX - 1682 - Help to keep level when you set the rig down on the floor. The quick release plate is exclusively designed for Ronin, Ronin M, and Ronin MX Gimbal stabilizers. Strong loading capacity: Loading capacity is up to 105 ounces/3 kilograms. The payload is 5kg, if you intend to use a heavy camera Sony FS5 or Canon C200 on your gimbal stabilizer, please use the Allen Wrench instead of Wingnuts to tighten the feet.

Features two 1/4'' threaded holes, two M5 holes and four 1/4'' countersinks for more accessories. Compatible with for dji ronin, ronin-m and ronin-mx smallrig ronin-m handheld to tripod adapter 1689 material: aluminum alloy includes: 1x quick Plate Mountmini-1682 4x 1/4" Screws 1x Hex Spanner Net Weight: 82g Nanuk 940 hard case fitted with a 2 level foam insert designed to fit and protect the DJI Ronin M stabilizer and accessories | Foam insert is compatible with previous Ronin M models | DJI Ronin M and accessories not included.

The feet provide multiple 1/4'' threads and a 3/8'' thread, allowing you to attach quick release plate for tripod shooting.

More information about SMALLRIG COMINU050911


Similar products



DSTE 2x NP-F550 Battery + DC01 Travel and Car Charger Adapter for Sony CCD-RV100 CCD-RV200 SC5 SC9 TR1 TR940 TR917 Camera CN-160 CN-216 CN-304 YN 300 VL600 LED Video Light as NP-F330 NP-F530 NP-F570


Dst Electron Technological Co., Ltd Sony NP-F550 - Application: can be installed on any round rod / pipe with the diameter of 24. 9mm - 25. 5mm. Battery type: li-ion dc 8. 4vmax dC 7. 2vmean. Hold a ronin-m or Ronin-MX more easily. Strong loading capacity: Loading capacity is up to 105 ounces/3 kilograms. The feet provide multiple 1/4'' threads and a 3/8'' thread, allowing you to attach quick release plate for tripod shooting.

Interior dimensions l200 x w14. 0 x h8. 0 inches, exterior dimensions l21. 7 x w16. 9 x h8. 5 inches. Waterproof ip67 rated, dustproof, shockproof | Automatic purge valve equalizes pressure on the inside of the case when travelling. Nk-7 resin is incredibly impact resistant | NANUK cases are designed to survive the toughest journey.

DSTE 2x NP-F550 Battery + DC01 Travel and Car Charger Adapter for Sony CCD-RV100 CCD-RV200 SC5 SC9 TR1 TR940 TR917 Camera CN-160 CN-216 CN-304 YN 300 VL600 LED Video Light as NP-F330 NP-F530 NP-F570 - In the box: - 2x brand new battery - 1x brand new travel charger - 1x brand new car charger - 2 years warranty work for: - ccd-rv100 - ccd-rv200 - ccd-sc5 - ccd-sc5/e - ccd-sc55e - ccd-sc55 - ccd-sc6 - ccd-sc65 - ccd-sc7 - ccd-sc7/e - ccd-sc8/e - ccd-sc9 - ccd-tr1 - ccd-tr11 - ccd-tr1100e - ccd-tr12 - ccd-tr18 - ccd-tr18e - ccd-tr1e - ccd-tr2 - ccd-tr200 - ccd-tr205 - ccd-tr215 - ccd-tr2200e - ccd-tr2300 - ccd-tr2300e - ccd-tr280pk - ccd-tr290pk - ccd-tr3 - ccd-tr300 - ccd-tr3000 - ccd-tr3000e - ccd-tr3100e - ccd-tr311e - ccd-tr315 - ccd-tr315e - ccd-tr317 - ccd-tr3200e - ccd-tr3300 - ccd-tr3300e - ccd-tr411e - ccd-tr412e - ccd-tr413 - ccd-tr414 - ccd-tr415e - ccd-tr416 - ccd-tr417 - ccd-tr417e - ccd-tr425e - ccd-tr427 - ccd-tr427e - ccd-tr500 - ccd-tr511e - ccd-tr512e - ccd-tr515e - ccd-tr516 - ccd-tr516e - ccd-tr517 - ccd-tr555 - ccd-tr57 - ccd-tr610 - ccd-tr617 - ccd-tr617e - ccd-tr618 - ccd-tr618e - ccd-tr640e - ccd-tr67 - ccd-tr710 - ccd-tr713e - ccd-tr716 - ccd-tr717 - ccd-tr717e - ccd-tr718 - ccd-tr718e - ccd-tr728 - ccd-tr728e - ccd-tr730e - ccd-tr76 - ccd-tr760e - ccd-tr810e - ccd-tr818 - ccd-tr840e - ccd-tr845e - tr87 - tr910 - tr913e - tr917 - tr918 - tr918e - tr930 - tr940 - pt-176s, yn300, cn-160, l132t, yn300 ii, yn608 rgb, oe-160c, yn600l ii, yn1410 - l116t, yn760, yn216, oe-160, yn600 air, yn300 iii, cn-216, yn600s, yn600 rgb, yn860, yn168, l132b, yn300 air, jyled-500s, yn360, yn1200, vl40t, vl162t, jyled-300s, yn608, yn308, cn-304 - yn160 iii, yn900, cn-576, VLS50B Nanuk 940 hard case fitted with a 2 level foam insert designed to fit and protect the DJI Ronin M stabilizer and accessories | Foam insert is compatible with previous Ronin M models | DJI Ronin M and accessories not included.

Compatibility: compatible with DJI Ronin-M, Freefly MOVI.

More information about Dst Electron Technological Co., Ltd Sony NP-F550


Similar products



NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger


RAVPower US-RP-BC006-011 - A 12v car lighter Adapter Convenient for Journey. Info function for Life Indication. Application: can be installed on any round rod / pipe with the diameter of 24. 9mm - 25. 5mm. 3 ways to charge: power up via a wall charger, car charger, or even a powerbank; Micro-USB 5V/2. 1a max input recharges 2 full batteries in just 6 hours.

Smallrig 25mm rod support feet 1914 is exclusively designed for DJI Ronin M/MX Grip and Freely Movi Ring. Package contents: 2 x 2900mah replacement batteries for sony np-f5501 x dc dual battery charger 1 x micro-usb cable 1 x Warranty Card Nanuk 940 hard case fitted with a 2 level foam insert designed to fit and protect the DJI Ronin M stabilizer and accessories | Foam insert is compatible with previous Ronin M models | DJI Ronin M and accessories not included.

NP-F550 RAVPower Battery Charger for Sony NP F970, F750, F770, F960, F550, F530, F330, F570, CCD-SC55, TR516, TR716, TR818, TR910, TR917 and more 2-Pack Replacement Battery Kit, Dual Slot Charger - Can be installed on any 25mm round Rod / Pipe. Compatible with DJI Ronin-M. The wall charger and the car charger were Not Included. This product is made of High Quality Machined, Anodized In Black. It can mount your led linght or the device with hot shoe base on DJI Ronin-M. Please unlock and slide out the Ronin handlebar assembly to install the mount.

Interior dimensions l200 x w14.

More information about RAVPower US-RP-BC006-011


Similar products