Fill-Rite FR4210G 12V 20 GPM Fuel Transfer Pump with Manual Nozzle, Discharge Hose, Suction Pipe


Tuthill FR4210G - 1/4 hp dc motor @ 2, 600 rpm provides up to 37' of discharge head. 20 amp draw maximum with a 30 minute duty cycle. Thermal overload protection prevents motor from overheating during abnormal usage. It can be used to pump gasoline, kerosene, diesel, ethanol blends up to 15%, methanol blends up to 15%, and bio-diesel up to B20.

The fr4210g is a 12v 20 gpm fuel transfer pump that comes with a 1” manual nozzle, 18’ 12 gauge 2-wire battery cable, 1” x 12’ discharge hose, 1” x 34” telescoping steel suction pipe, and a 5’ 12-gauge ground wire. Capable of providing a suction lift of up to 6. 5' diesel. Durable cast iron pump housing built to withstand the wear and tear of rough operating environments.

More information about Tuthill FR4210G

Apache AS-3075BLUE Fuel Swivel, 1"


Apache 99000234 - Swivel helps prevent twisting, binding, & kinking of fuel transfer hose. This product meets customer Requirement. Swivel end for use with Apache fuel transfer hose and fuel nozzles. This product meets customer requirement. Swivel end for use with Apache fuel transfer hose & Fuel nozzles. Swivels a full 360 deg Degree.

Product is Manufactured in China. Product is Manufactured in China.

More information about Apache 99000234


Similar products



Green Auto Shut-Faucet Freezing Diesel Nozzle


Apache 99000247 - This product meets customer requirement. Product is Manufactured in China. This product meets customer requirement. Do not use on gravity flow systems. This product meets customer Requirement. Swivel end for use with Apache fuel transfer hose and fuel nozzles. Designed for fuel applications requiring an auto shut-off.

Product is manufactured in China. A minimum of 10 psi pounds per square inch is required to operate the auto shut-off. Designed for fuel applications requiring an auto shut-off. Small, trim, and lightweight with a low profile aluminum body and a full hand insulator that protects the nozzle and vehicle, insulates hand when in use.

Green Auto Shut-Faucet Freezing Diesel Nozzle - For use with gasoline, and gasoline blends, 15% ethanol E85, methanol, and diesel fuel. Hold open handle clip for fast, effortless filling. Product is manufactured in China.

More information about Apache 99000247


Similar products



Fill-Rite FRH10020 1" x 20 ft. Fuel Transfer Hose


Tuthill FRH10020 - This product meets customer requirement. Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. High quality Nitrile inner tube. Designed for fuel applications requiring an auto shut-off.

Product is manufactured in China. This product meets customer Requirement. Swivel end for use with Apache fuel transfer hose and fuel nozzles. We use only the most durable materials to insure long life and dependability. Fill-rite and sotera branded products deliver superior performance time and time again, regardless of the application or installation.

Fill-Rite FRH10020 1" x 20 ft. Fuel Transfer Hose - Product is Manufactured in China. Dispense diesel fuel, gasoline, kerosene, and petroleum oils. Designed for use with all electric pumps.

More information about Tuthill FRH10020


Similar products



Fill-Rite N100DAU13 Ultra High Flow Automatic Nozzle, 1" Length


Tuthill N100DAU13 - We use only the most durable materials to insure long life and dependability. Three-position latch for automatic flow at 30, 24 and 8 GPM. Automatic shut-off and Large spout spring to hold nozzle in place. This product meets customer requirement. Dispense diesel fuel, kerosene, gasoline, and petroleum oils. Designed for use with all electric pumps.

. Minimal spray pattern reduces foaming and false shut offs. High quality Nitrile inner tube. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Designed for fuel applications requiring an auto shut-off. Insulated hand grip and rated to -20 Fahrenheit operation. Product is Manufactured in China. Heavy duty hanging hook compatible with all Fill-Rite products.

Fill-Rite N100DAU13 Ultra High Flow Automatic Nozzle, 1" Length - 50 psi working pressure and Angled outlet to minimize hose wear. Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”. This product meets customer Requirement. Swivel end for use with Apache fuel transfer hose and fuel nozzles.

Fill-rite and sotera branded products deliver superior performance time and time again, regardless of the application or installation.

More information about Tuthill N100DAU13


Similar products



Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle


Tuthill N075DAU10 - Designed for fuel applications requiring an auto shut-off. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. This product meets customer Requirement. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Dispense diesel fuel, gasoline, kerosene, and petroleum oils.

Designed for use with all electric pumps. Automatic shut-off and Large spout spring to hold nozzle in place. Convenient one-finger hold-open clip to set flow rate Swivel end for use with Apache fuel transfer hose and fuel nozzles. Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety.

Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle - Three-position latch for automatic flow at 30, 24 and 8 GPM. Includes grip spring on spout, angled inlet to reduce hose wear, green weather resistant cover, heavy duty, UL/cUL. Viton seals for resistance to heat and chemicals. Minimal spray pattern reduces foaming and false shut offs. High quality Nitrile inner tube.

1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Heavy duty hanging hook compatible with all Fill-Rite products.

More information about Tuthill N075DAU10


Similar products



Fill-Rite S100H1315 1" Multi-Plane Swivel


Tuthill Transfer Systems S100H1315 - Product is manufactured in China. Swivel end for use with Apache fuel transfer hose and fuel nozzles. This product adds a great value. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Designed for fuel applications requiring an auto shut-off. Product is Manufactured in China. This product meets customer requirement.

Automatic shut-off and Large spout spring to hold nozzle in place. Product is highly durable and very easy to use. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. This product meets customer Requirement. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Viton seals for resistance to heat and chemicals.

Fill-Rite S100H1315 1" Multi-Plane Swivel - Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. Insulated hand grip and rated to -20 Fahrenheit operation. This product is manufactured in China. Product is highly durable and very easy to use. Ul listed for gasoline, diesel and kerosene.

More information about Tuthill Transfer Systems S100H1315


Similar products



Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose


Tuthill FRH07520 - This product is manufactured in China. 50 psi working pressure and Angled outlet to minimize hose wear. Ul listed for gasoline, diesel and kerosene. This product meets customer requirement. This product is manufactured in USA. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Minimal spray pattern reduces foaming and false shut offs.

Product is highly durable and very easy to use. Product is Manufactured in China. Product is highly durable and very easy to use. This product adds a great value. Aluminum for resistance to corrosion and tarnishing. Insulated hand grip and rated to -20 Fahrenheit operation. Swivel end for use with Apache fuel transfer hose and fuel nozzles.

Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose - Product is highly durable and very easy to use. 3/4" x 20', fuel pump hose, with static wire, spring guards, & Threaded Fittings, For All 12V & AC Products With 3/4" Outlets. Product is manufactured in China. This product adds a great value. This product adds a great value.

More information about Tuthill FRH07520


Similar products



GOLDENROD 495 Bowl Fuel Tank Filter with 1" NPT Top Cap


Dutton-Lainson Company 495 - Product is manufactured in China. Viton seals for resistance to heat and chemicals. Minimal spray pattern reduces foaming and false shut offs. This product is manufactured in USA. U. S. Heavy duty hanging hook compatible with all Fill-Rite products. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Swivel end for use with Apache fuel transfer hose and fuel nozzles.

This product meets customer Requirement. 50 psi working pressure and Angled outlet to minimize hose wear. Designed for fuel applications requiring an auto shut-off. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. Product is Manufactured in China. Working pressure of 50 psi and Minimum temperature rating of -20 degrees F.

GOLDENROD 495 Bowl Fuel Tank Filter with 1" NPT Top Cap - Product is highly durable and very easy to use. Aluminum for resistance to corrosion and tarnishing. Three-position latch for automatic flow at 30, 24 and 8 GPM. Automatic shut-off and Large spout spring to hold nozzle in place. See-thru bowl has an easy to use sediment drain valve and allows for visual monitoring of fuel flow.

More information about Dutton-Lainson Company 495


Similar products



GOLDENROD 496 Bowl Water-Block Fuel Tank Filter with 1" NPT Top Cap


Dutton-Lainson Company 496 - Aluminum for resistance to corrosion and tarnishing. Product is manufactured in China. Inches of filter surface for efficient action. Three-position latch for automatic flow at 30, 24 and 8 GPM. This product is manufactured in USA. This product meets customer requirement. May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination.

50 psi working pressure and Angled outlet to minimize hose wear. Product is highly durable and very easy to use. Swivel end for use with Apache fuel transfer hose and fuel nozzles. This product is manufactured in China. Automatic shut-off and Large spout spring to hold nozzle in place. Insulated hand grip and rated to -20 Fahrenheit operation.

GOLDENROD 496 Bowl Water-Block Fuel Tank Filter with 1" NPT Top Cap - Designed for fuel applications requiring an auto shut-off. Ul listed for gasoline, diesel and kerosene. Zinc die-cast top cap with 3/4" NPT pipe fittings. Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety. Product is Manufactured in China. This product meets customer Requirement.

More information about Dutton-Lainson Company 496


Similar products



Apache CPT02 Fuel Swivel, Original Version, 3/4"


Apache 99000233 - Viton seals for resistance to heat and chemicals. 1 in npt-f inlet, 1 1/8 in oD spout with Viton seals and o-rings. Zinc die-cast top cap with 3/4" NPT pipe fittings. Product is Manufactured in China. Swivel helps prevent twisting, binding, & kinking of fuel transfer hose. 50 psi working pressure and Angled outlet to minimize hose wear.

Product is Manufactured in China. May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination. This product meets customer requirement. Heavy duty hanging hook compatible with all Fill-Rite products. 17 micron filtration,. Maximum recommended flow rate of 25 gPM gravity flow rate is approximately 5 gpm with a 24 inch head; working pressure up to 150 psi.

Apache CPT02 Fuel Swivel, Original Version, 3/4" - This product meets customer Requirement. Product is highly durable and very easy to use. Made in the U. S. A. Swivel end for use with Apache fuel transfer hose and fuel nozzles.

More information about Apache 99000233


Similar products