As an Amazon Associate I earn from qualifying purchases.
APPS2Car #ad - Strong stickness: original 3m vhb stick adhesive pads, 1. 55mm thickness black vhb adhesive pads, in order to tear off the film more easily, stronger than most adhesive pads. Note:since the red film of the 3m tape is hard to tear off, we changed the red film with 3M to blue film, Double sided self sticky, but the black Vhb Sticky Adhesive Pads is original 3M.
Note:1, it is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use. 5, please don't stick the 3M adhesive pad on very soft, texture, rugged, grease surface or leather surface.2
Rectangular 3m vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, Trainium, which is stable even in bumpy roads. Suitable for stick many kinds of material with flat hard surface. It can be used in home bathroom mirror, bed post, wall, refrigerator, locker, office, driving personnel and other related equipment replace. Compatible with wizgear, PLDHPRO, Bextrix, Scosche, Ailun etc. Magnetic phone car mount.
AZXYI #ad - First peel off the white side of the adhesive and stick it to the car mount base. That means no wax, dirt or porous surfaces and applying steady pressure for a period of time - not just stuck on for 3 seconds. Tips and tricks - these adhesives perform flawlessly when being applied with steady pressure on a clean surface.
After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard. Rounded rectangle adhesive pads with pressure-sensitive VHB adhesive pads.
These double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, bed post, Trainium. Second, they need time to cure. They will cure about 50% in 20 minutes - but need 2 days to be 100%. The size compatible with most magnetic dashboard mount base, and the thickness is 003".
AZXYI #ad - After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield. Easy to useto maximize adhesive contact, please clean the adhesive surface before use and let it dry, free of contaminates. Press down repeatedly to increase the contact of the adhesive with the substrate.
Very high bond & easy to removethese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need.
And wait at least 24 hours to use after stuck. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Please wait 24 HOURS to use. First peel off the white side of the adhesive and stick it to the car mount base. 6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3.
volport #ad - What you get: volport heavy duty two sided tape 8 pack small 3m phone sticky adhesive patches gel top for hanging as backup, simple strongest alternative 2 PACK large two sided 3M adhesive disc bulk reapply and hold for socket grips, extends the lifespan of magic mount and dash mount, addition 2 PACK alcohol pads. Wait 24 hour to use after stuck. Phone holder adhesive backing: red multi-use 8 pack smaller 2 sides vhb 3m replace sticky adhesive glue part works for hands free car dash holder, phone ring holder, ball mount, dashcam, grip holder back & magnetic cell phone car phone mount base for applications.
Use heat tolerance adhesive pads sticky part to reattach it. For the ultra thin 2 sided 3m adhesive tapes dots, if you find the magnet phone holder cradle-less adhesion tabs 2-sided hard to be tearable, pls press it back and peel again.
Tiny long-lasting adhesive replacement kit re-stick wall mount & magnetic mount. 8 pack small sticky adhesive replacement is just designed for magnetic mounts and 2 pack big sticky adhesive replacement is just designed for the base of socket grip. Easy to use: you need to remove the used tacky double-sided tapes patch and removable thick 3m circle tape tab of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then restick to attach a new effective authentic permanent fixture and replacable 3M circles self adhesive sticky back film on the backs of flex grip mount and press firmly for 5 to 10 minutes for better sticking to the bottom of car mount.
These sticky pad can stick to lots of materials, metals, such as wood, papers, glass, and plastics and fabrics, etc. What you get:6 pcs super strong double side sticker for car phone mount holder bracket, wall Pictures and more. High performance:waterproof, excellent durability, Tiles, Windshield, Dashboard Toys, Wall holder, Camera, GPS, Simultaneous fixation and sealing.
PKYAA #ad - It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. 6 pcs adhesive pads for dashboard magnetic mountperfect size for 95% stick-on dashboard magnetic phone car mount with rounded rectangle base on the market.
Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. Easy to usefirst peel off the white side of the adhesive and stick the adhesive to the car phone mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car phone mount to your car dashboard.
Size: the length is 1. 97", the width is 1. 18", and the thickness is 003". Usabilitywe offer both permanent and removable adhesives that provide a secure bond to the car dashboard after several hours or days yet are initially removable for example to recover wrong positioning and allow the car mount to be removed without leaving adhesive residue or damaging the surface. Automotive grade adhesivePKYAA automotive mounting industrial grade adhesive successfully bonds car dashboard for permanent and repositionable applications.
PKYAA #ad - It also resists heat and moisture, and protects adhesive surfaces against scratches, easy peels off without leaving any sticky residue behind. Pkyaa sticky adhesive is extremely compatible with the base and back. 8 pcs 091" very high bond adhesive compatible with socket mounts base the 23mm091" double side sticky adhesive can be used on the bottom of Socket car mounts, instrument panel cam holders, magnetic car mounts, gps holders and vent mount to maintain stability even on rough roads.
4 pcs 1. 38" very high bond adhesive compatible with socket basepkyaa offers 4Pcs Very High Bond double side sticky adhesive compatible with Socket Base, the adhesive is 35mm1.
Pkyaa very high bond sticky adhesive replacement superior performancepkyAA offer original Very High Bond super-adhesive is 40% stronger than ordinary black sticky, high temperature resistant and low temperature resistant. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard. Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. First peel off the white side of the adhesive and stick it to the car mount base.
volport #ad - 3. Your satisfaction is our priority. 2. This 3m double face strength sticky part big adhesive backing dot is also waterproof. Designed for suction cup mount volport 3m round flat adhesive stickers fit for dashboard suction cup mount cradle, dashboard pad mounting disk, GPS, hook, backup camera screen, rv, towel rack/ring, bathroom shower caddy / head /shelf /rod/, iPad, make your sucker stronger.
It is also compatible with dash cam, soap dispenser, car cell phone mount, suction adhesive base/car clips, tablet holder, hanging hooks, ect. You can also cut or trim the two sides sticky tabs to any smaller size you need. 5. Just peel off the old adhesive stickly dots gel from mount and clean the the surface with alcohol pad first, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, when the surface is dried, then wait 24 HOURS to use.1
4. Multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for roadster mobile phone carmount, furniture，tiles. Easy to use : this large circle 2 sides refill adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying.
AZXYI #ad - Cut into any size you need & designed for suction items - you can cut pads into smaller pieces if need. Easy to install - provided rounded rectangle raised label to easily peel off the white release film of the adhesive pads. It also resists heat and moisture, easy peels off without leaving any sticky residue behind.
When using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other white side film and stick to your car dashboard. First peel off the white side of the adhesive and stick it to the car mount base.
Compatible with most suction cup dashboard mount and other windshield long arm mount, camera mount, EZ Pass/I-Pass/SunPass holder, ETC, wireless charger base, GPS holder, dash camera mount holder etc on the market.6pcs clear adhesives replacement - azxyi 6 pcs circle heat resistant clear sticky adhesive padsDiameter: 70mm, 2. 76" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
1. APPS2Car
#ad3M Vhb Sticky Adhesive Pads Replacement Mounting Tape 4 Pcs, APPS2Car Dashboard Sticker Pads for Magnetic Phone Car Mount,Car Mount Adhesive,Double Sided 3M Adhesive Pads,Car Mount Sticker Tapes
#adNote:1, it is recommended to wait at least 24 hours ensure the sticker get the best stickiness before use. 5, please don't stick the 3M adhesive pad on very soft, texture, rugged, grease surface or leather surface.2
More information #ad
2, make sure the desired surface is clean and dry. 3, the 3m vhb adhesive pad is one-time use. 4, worry-free:apps2car comes with worry-free lifetime and excellent customer service. Rectangular 3m vhb sticky adhesive tape can be used on the bottom of the most dashboard 360 degrees Rotation magnetic car phone mount holder, Trainium, which is stable even in bumpy roads. Suitable for stick many kinds of material with flat hard surface. It can be used in home bathroom mirror, bed post, wall, refrigerator, locker, office, driving personnel and other related equipment replace. Compatible with wizgear, PLDHPRO, Bextrix, Scosche, Ailun etc. Magnetic phone car mount.
| Brand | APPS2Car #ad |
| Manufacturer | Wiiki-Tech #ad |
More information #ad
2. AZXYI
#adVery High Bond Car Adhesive, AZXYI 9 PCS Dashboard Sticky Adhesive Replacement, Double Sided Sticky Pads Sticker Tapes for Mounting Windshield Dashboard Magnetic Phone Car Mount and Dash Cam
#adAfter applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your dashboard. Rounded rectangle adhesive pads with pressure-sensitive VHB adhesive pads.
More information #ad
Suitable for stick on many flat hard surface - can be used in home bathroom mirror, refrigerator, locker, wall, Scosche, Scosche, office, Bextrix, driving personnel and other related equipment replace. It is a strong sticky adhesive replacement if your magnet dashboard car holder or phone dock lost its stickness. These double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. These magnetic dashboard mount base replacement sticky adhesive compatible with Wizgear, bed post, Trainium. Second, they need time to cure. They will cure about 50% in 20 minutes - but need 2 days to be 100%. The size compatible with most magnetic dashboard mount base, and the thickness is 003".
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 0.03 Inches |
| Length | 1.97 Inches |
| Weight | 0.04 Pounds |
| Width | 1.18 Inches |
| Part Number | AZXYI-9C |
| Model | AZXYI-9C |
More information #ad
3. AZXYI
#adVery High Bond Sticky Adhesive, AZXYI 6 Pack Dashboard Pad Mounting Disk Adhesive Replacement Kit, Double-Sided Stickers for Suction Cup Dashboard Phone Holder & Windshield Car Mount
#adVery high bond & easy to removethese high-strength, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. Cut into any size you need & compatible with suction baseyou can cut pads into smaller pieces if need.
More information #ad
You can also adhere the transparent adhesive to the suction cup directly, not affecting the look of the suction cup. When using, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, first easily peel off the white release film, then peel off the other red side film and stick to your car dashboard. And wait at least 24 hours to use after stuck. Easy to installprovided rounded rectangle raised label to easily peel off the red release film of the adhesive pads. Please wait 24 HOURS to use. First peel off the white side of the adhesive and stick it to the car mount base. 6pcs clear adhesives replacementazxyi offers 6 pcs round clear sticky adhesive padsDiameter: 80mm, 3.
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 0.04 Inches |
| Length | 3.15 Inches |
| Width | 3.15 Inches |
| Part Number | AZXYI-6DR |
| Model | AZXYI-6DR |
More information #ad
4. volport
#adVolport 10 Pack VHB Sticker Pads for Car Magnetic Phone Holder and 2pcs 1.38 Inches Double Sided Tape for Collapsible Grip & Stand, 3M Sticky Adhesive Replacement Compatible with Socket Mount Base
#adUse heat tolerance adhesive pads sticky part to reattach it. For the ultra thin 2 sided 3m adhesive tapes dots, if you find the magnet phone holder cradle-less adhesion tabs 2-sided hard to be tearable, pls press it back and peel again.
More information #ad
Replaceable alcohol pads extra: clean the chosen area to place your smartphone. Super strong circular 3m sticky adhesives exterior: extra strong 2 pack both sides larger adhesive replacement foam thin sheet work perfectly for collapsible grip & switchable tops socket. Tiny long-lasting adhesive replacement kit re-stick wall mount & magnetic mount. 8 pack small sticky adhesive replacement is just designed for magnetic mounts and 2 pack big sticky adhesive replacement is just designed for the base of socket grip. Easy to use: you need to remove the used tacky double-sided tapes patch and removable thick 3m circle tape tab of phone car mount and clean up the mounting surface with alcohol pad included until fully dry before installation, then restick to attach a new effective authentic permanent fixture and replacable 3M circles self adhesive sticky back film on the backs of flex grip mount and press firmly for 5 to 10 minutes for better sticking to the bottom of car mount.
| Brand | volport #ad |
| Manufacturer | VOLPORT #ad |
| Height | 0.02 Inches |
| Length | 0.9 Inches |
| Weight | 0.03 Pounds |
| Width | 0.9 Inches |
| Part Number | VOLPORT-VM0028US |
| Model | 4351481580 |
More information #ad
5. MU-CN
#ad80mm3.15" Circular Double Sided Sticky Pads 6Pcs Strong Adhesive Pad for Car Mount Mounting Holder Windshield GPS Camera Lock Sucker Suction Cup Hook Dashboard Toys
#adMU-CN #ad - Strong adhesive and not leave a residue：Strong adhesive is strong yet leaves no residue when removal is required. Cut into any size you need:You can cut pads into smaller pieces if need. Strong adhesive pads compatible with xiaoyi camera, tiles, gps camera, windshield Long Arm Car Phone Mount and other Car Phone Mount Holder Bracket, Decorations, dashboard toys, Windshield, use widely:double sided clear acrylic adhesive Disk Round Tough Sticky Tape Compatible with Mpow 033 car mount holder, Wall Pictures.More information #ad
Replacement adhesive kit for Long Arm Universal Magnetic Cradle Windshield Dashboard Cell Phone Mount Holder etc. These sticky pad can stick to lots of materials, metals, such as wood, papers, glass, and plastics and fabrics, etc. What you get:6 pcs super strong double side sticker for car phone mount holder bracket, wall Pictures and more. High performance:waterproof, excellent durability, Tiles, Windshield, Dashboard Toys, Wall holder, Camera, GPS, Simultaneous fixation and sealing.
| Brand | MU-CN #ad |
| Manufacturer | MU-CN #ad |
| Height | 3.12 Inches |
| Length | 3.12 Inches |
| Weight | 0.08 Pounds |
| Width | 0.03 Inches |
| Part Number | de-jsBag-20h-332 |
More information #ad
6. PKYAA
#adPKYAA Adhesive Replacement Pads for Dashboard Magnetic Phone Holder, Sticky Adhesive for Car Mount, 6 Pcs Double-Sided Sticker Pads Compatible with Stick-on Magnetic Car Mount Base
#adDurabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. Easy to usefirst peel off the white side of the adhesive and stick the adhesive to the car phone mount base. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car phone mount to your car dashboard.
More information #ad
Ensure that the car mount has a clean surface to adhere to so that it sticks properly. Rounded bulge is designed for more easily gripping the liner edge for removal. Size: the length is 1. 97", the width is 1. 18", and the thickness is 003". Usabilitywe offer both permanent and removable adhesives that provide a secure bond to the car dashboard after several hours or days yet are initially removable for example to recover wrong positioning and allow the car mount to be removed without leaving adhesive residue or damaging the surface. Automotive grade adhesivePKYAA automotive mounting industrial grade adhesive successfully bonds car dashboard for permanent and repositionable applications.
| Brand | PKYAA #ad |
| Manufacturer | PKYAA #ad |
| Height | 0.03 Inches |
| Length | 1.97 Inches |
| Weight | 0.04 Pounds |
| Width | 1.18 inches |
| Part Number | PKYAA-002 |
| Model | PKYAA-002 |
More information #ad
7. PKYAA
#adPKYAA Double-Sided Replacement Tape for Car Magnetic Phone Holder, 4 Pack Sticker Pads for Collapsible Grip & Stand Base, 8 Pack Sticky Adhesive Compatible with Socket Mount Base
#ad4 pcs 1. 38" very high bond adhesive compatible with socket basepkyaa offers 4Pcs Very High Bond double side sticky adhesive compatible with Socket Base, the adhesive is 35mm1.
More information #ad
38" and fit out-stand base perfectly. Easy to useplease clean the adhesive surface before use and let it dry, free of contaminates. And wait at least 24 hours to use after stuck. Pkyaa very high bond sticky adhesive replacement superior performancepkyAA offer original Very High Bond super-adhesive is 40% stronger than ordinary black sticky, high temperature resistant and low temperature resistant. After applying some pressure on the adhesive, peel off the red film side of the adhesive and stick the car mount to your car dashboard. Durabilitythese double-sided stickers roll with pressure sensitive adhesive bonds almost instantly with no drying time. First peel off the white side of the adhesive and stick it to the car mount base.
| Brand | PKYAA #ad |
| Manufacturer | PKYAA #ad |
| Height | 0.03 Inches |
| Length | 0.91 Inches |
| Weight | 0.02 Pounds |
| Width | 0.91 Inches |
| Part Number | PKYAA-3M002 |
| Model | PKYAA-3M002 |
More information #ad
8. E-REPAIR
#adE-repair Back Cover Plate Adhesive Glue Replacement for Samsung Galaxy S6 G920
#adE-REPAIR #ad - Including clean wiper with "E-REPAIR" LOGO. Including 3 pieces at this price. Compatible with Samsung Galaxy S6 G920 It is used to assemble back cover housing.More information #ad
| Brand | E-REPAIR #ad |
| Manufacturer | E-REPAIR #ad |
| Weight | 0.04 Pounds |
| Part Number | 7902246914543 |
| Model | 5823756340 |
More information #ad
9. volport
#adSticky Adhesive Replacement for Dashboard Suction Cup Mount, 80mm 3.15" VOLPORT 4pcs 3M VHB Circle Double-Sided Extra Strong Adhesive Sticker Tapes for Dash/Camera/GPS/Ipad/Car Phone Sucker Holders
#adIt is also compatible with dash cam, soap dispenser, car cell phone mount, suction adhesive base/car clips, tablet holder, hanging hooks, ect. You can also cut or trim the two sides sticky tabs to any smaller size you need. 5. Just peel off the old adhesive stickly dots gel from mount and clean the the surface with alcohol pad first, tear off the 3m adhesive film to stick it to the bottom of the suction cup bracket directly and press down repeatedly for 5-10 minutes for better connecting to the surface, when the surface is dried, then wait 24 HOURS to use.1
More information #ad
1. Genuine 3m heat resistant tile semi permanent sticky adhesive sheeting disc replacement the high temperature resistance performance of these suction cup adhesive back for dash cam mount/stainless steel holders/decorations/security camera/shower washcloth holder/towel bar/shower walls/motion sensor light/hanger/picture/hottub/kitchen/sink/glass doors/aluminum toilet paper holders reaches 120°C+，even on hot summer days in Texas, you can also use it safely, no more worries in cold weather, too.44. Multipurpose tearable tacky double sided gripping fixate anti gravity gel strips patches pad for roadster mobile phone carmount, furniture，tiles. Easy to use : this large circle 2 sides refill adhesion tape replacement kit comes with alcohol packs to clean the surfaces before applying.
| Brand | volport #ad |
| Manufacturer | volport #ad |
| Height | 0.39 Inches |
| Length | 3.94 Inches |
| Width | 3.54 Inches |
| Part Number | V-C1CC-N |
More information #ad
10. AZXYI
#adGPS, Very High Bond Sticky Adhesive for Dashboard Pad Mounting Disk, Windshield, Dash Cam, AZXYI 6pcs Car Sticky Adhesive Replacement, Double Sided Stickers Adhesive for Suction Cup Dashboard Disc
#adWhen using, first easily peel off the white release film, stick the adhesive to the dashboard pad mounting disk or to the suction cup base directly, then peel off the other white side film and stick to your car dashboard. First peel off the white side of the adhesive and stick it to the car mount base.
More information #ad
Very high bond & easy to removethese high-strength, and protects adhesive surfaces against scratches, double-sided adhesive pads let you quickly and easily create a long-lasting bond, bonding almost instantly with no drying time. Note: the package not include the mounting disk. Please wait 24 HOURS to use. After applying some pressure on the adhesive, please clean the adhesive surface before use and let it dry, peel off the red film side of the adhesive and stick the car mount to your dashboard/ windshield. Compatible with most suction cup dashboard mount and other windshield long arm mount, camera mount, EZ Pass/I-Pass/SunPass holder, ETC, wireless charger base, GPS holder, dash camera mount holder etc on the market.6pcs clear adhesives replacement - azxyi 6 pcs circle heat resistant clear sticky adhesive padsDiameter: 70mm, 2. 76" for attaching dashboard pad mounting disk of your suction cup dashboard phone mount.
| Brand | AZXYI #ad |
| Manufacturer | AZXYI #ad |
| Height | 0.04 Inches |
| Length | 2.76 Inches |
| Weight | 0.07 Pounds |
| Width | 2.76 Inches |
| Part Number | AZXYI-6DW |
| Model | AZXYI-6DW |
More information #ad
