As an Amazon Associate I earn from qualifying purchases.

Enclosure: 105d x 8. 5w x 2. 5h inches - weight: 3 pounds - Includes DC power cable. 250 watts psk and digital. Tuning time: 05 to 6 seconds full tune, 01 second memory tune - Built in frequency counter for memory operation.


Tuning time: 05 to 6 seconds full tune, < 01 second memory tune - Built in frequency counter for memory operation. 75 watts with psk or digital modes. 5 to 250 watts ssb and cw.





1. LDG Electronics
#ad
Updated Features Include an LED Indicator for Antenna Selection and an LED to Indicate When in Bypass .2 Year Warranty, AT-1000PROII LDG Electronics Automatic Antenna Tuner 1.8-54 MHz, 200-1000 Watts
#adLDG Electronics #ad - Power rating hf 1. 8 to 30 mhz: 1000 watts single side band, packet, 750 watts CW, 400 Watts Digital RTTY, etc. Power requirements: 11 to 15 volts DC @ 1 Amp user supplies power source. Tuning impedance: 6 to 1000 ohms approximately 10:1 SWR Dual meter scale 100/1000 watts and SWR.More information #ad
Two position antenna switch with 2000 memories for each position. 6 meters: 250 Watts any mode. Continuous coverage 1. 8 to 54 MHz. Tuning power: 5 to 125 watts maximum. Includes 6 foot power cable 5. 5 x 2. 5 mm. Tuning time: 02 recall, 10 seconds average, 30 seconds max.Brand | LDG Electronics #ad |
Manufacturer | LDG Electronics #ad |
Height | 11 Inches |
Length | 3 Inches |
Weight | 5 Pounds |
Width | 10 Inches |
Part Number | AT-1000PROII |
Model | AT-1000PROII |
More information #ad
2. LDG Electronics
#ad
2 Year Warranty, AT-600PROII LDG Electronics Automatic Antenna Tuner 1.8-54 MHz, 600 Watts
#adLDG Electronics #ad - Easy to read led bar graph display for RF power, SWR and status. 5. 5×2. 5mm. For dipoles, vs, verticals, Beams or and Coax Fed Antenna.Enclosure: 105d x 8. 5w x 2. 5h inches - weight: 3 pounds - Includes DC power cable. 250 watts psk and digital. Tuning time: 05 to 6 seconds full tune, 01 second memory tune - Built in frequency counter for memory operation.
More information #ad
Tunes 6 to 800 ohm loads 16 to 150 ohms on 6M. Frequency coverage: 1. 8 to 54. 0 mhz. 4, 000 memories for instantaneous band changing - Two position antenna switch with memories for each position. 600 watts ssb and cw, 250 watts on 6m.Brand | LDG Electronics #ad |
Manufacturer | LDG Electronics #ad |
Height | 2.5 Inches |
Length | 10.5 Inches |
Weight | 3 Pounds |
Width | 8.5 Inches |
Part Number | AT-600PROII |
Model | AT-600PROII |
More information #ad
3. LDG Electronics
#ad
2000 Memories, 0.1-20 Watts, LDG Electronics Z-817 Automatic Antenna Tuner 1.8-54 MHz, 2 Year Warranty
#adLDG Electronics #ad - Weight: 9. 3 ounces without batteries. Cat thru port for computer connection. 16 to 150 on 6m about 3:1. Built-in cat port interface. 2000 memories when used with FT-817 interface 200 memories for other radios.More information #ad
1. 8 to 54 mhz coverage continuous coverage for mars tunes 6 to 600 ohms about 10:1 SWR range. Battery operated 4 x 1. 5v alkaline aa not included - dimensions: 5. 1”l, 4. 7”w, 1. 7”h. Rf power 01 to 20 watts ssb and CW, 5 watts for digital modes. 38400 baud.Brand | LDG Electronics #ad |
Manufacturer | LDG Electronics #ad |
Height | 1.7 Inches |
Length | 5.1 Inches |
Weight | 0.58 Pounds |
Width | 4.7 Inches |
Part Number | Z-817 |
Model | Z-817 |
More information #ad
4. LDG Electronics
#ad
AT-200PROII LDG Electronics Automatic Antenna Tuner 1.8-54 MHz, 5-250 Watts SSB and CW. 100 watts on 6M. 75 watts with PSK or Digital Modes. 2 Year Warranty
#adLDG Electronics #ad - Frequency coverage: 1. 8 to 54. 0 mhz. 100 watts on 6m. Tunes 6 to 800 ohm loads 16 to 150 ohms on 6m, verticals, 6 to 3600 ohms with optional 4:1 Balun LDG RBA 4-1 - For Dipoles, Vees, Beams or and Coax Fed Antenna.Tuning time: 05 to 6 seconds full tune, < 01 second memory tune - Built in frequency counter for memory operation. 75 watts with psk or digital modes. 5 to 250 watts ssb and cw.
More information #ad
Leds for antenna position and bypass - 4, 000 memories 2000 for each antenna for instantaneous band changing - Two position antenna switch with memories for four antennas on each position. Includes 6' dc power cable - enclosure: 9. 5d x 7. 1w x 2. 0h inches - Weight: 2 pounds. Easy to read led bargraph display for RF power, SWR and status.Brand | LDG Electronics #ad |
Manufacturer | LDG Electronics #ad |
Height | 2 Inches |
Length | 9.5 Inches |
Weight | 2 Pounds |
Width | 7.1 Inches |
Part Number | AT-200PROII |
Model | AT-200PROII |
More information #ad
5. LDG Electronics
#ad
Updated Features Include an LED Indicator for Antenna Selection and an LED to Indicate When in Bypass .2 Year Warranty, AT-100PROII LDG Electronics Automatic Antenna Tuner 1.8-54 MHz, 1-125 Watts
#adLDG Electronics #ad - It covers 1. 8-54 mhz, and features a two-position antenna switch allowing instant switching between two antennas. For dipoles, verticals, vs, Beams or and Coax Fed Antenna.More information #ad
125 watts ssb/cw, 30W Digital. Easy to read led bar-graph display for RF power, SWR, status. Power requirements: 11 to 16 volts DC at 500 mA Max. Led indicator for antenna selection and bypass.Brand | LDG Electronics #ad |
Manufacturer | LDG Electronics #ad |
Height | 2 Inches |
Length | 7.5 Inches |
Weight | 1.35 Pounds |
Width | 5.5 Inches |
Part Number | AT-100PROII |
Model | AT-100PROII |
More information #ad
6. LDG Electronics
#ad
0.1-125 Watts, 2 Year Warranty, Z-11PROII LDG Electronics Automatic Antenna Tuner 1.8-54 MHz
#adLDG Electronics #ad - 1. 8 to 54. 0 mhz coverage. 1 to 125 watts ssb and cw peak power, 30 watts on PSK and digital modes, and 100 watts on 6 meters. Dimensions: 8. 25”l x 5. 0”w x 1. 5”h. Built-in frequency counter for memory operation.More information #ad
Brand | LDG Electronics #ad |
Manufacturer | LDG Electronics #ad |
Height | 1.5 Inches |
Length | 7.7 Inches |
Weight | 1.5 Pounds |
Width | 5 Inches |
Part Number | Z-11PROII |
Model | Z-11PROII |
More information #ad
7. Icom
#ad
ICOM AH4 13 Auto Tuner
#adIcom #ad - Package dimensions: 12. 5 l x 42. 2 h x 17. 8 w centimeters. Package weight: 2. 87 kilograms. The ah4 wide range automatic antenna tuner is designed to work with the with select ICOM. Country of Origin: Japan.More information #ad
Brand | Icom #ad |
Manufacturer | ICOM #ad |
Weight | 1 Pounds |
Part Number | AH4 13 |
Model | AH4 13 |
Warranty | Manufacturer Warranty |
More information #ad
8. Molex
#ad
Molex, 4 Pin -Tuner Connector Plug for ICOM LDG Automatic Antenna Tuner ATU 3 Complete DIY Set
#adMolex #ad - Erminal wired applicable wires: 14-20 AWG. Temperature range - operating-40°C to +105°C. Circuits maximum 4. Circuits Detail 4x1. Molex 4 pin tuner connector Plug For ICOM LDG.More information #ad
Brand | Molex #ad |
Manufacturer | Molex #ad |
Part Number | 3 Matched Sets, 4-Circuits |
More information #ad
9. Shure
#ad
Shure PA411 Four Port Antenna Combiner
#adShure #ad - Main rf output connector connects to any antenna with a BNC connector; RF LED indicators display signal present and signal overload per input. Features a wideband 470-865 MHz frequency range. Power output distributes DC power to PSM transmitters accessory power cable required; features a front panel power switch.More information #ad
Distributes dc power and rf signal while reducing rack clutter for up to four PSM300 systems. Includes pa411, rack mount and hardware kits, BNC cable, power splitter cable, BNC bulkhead adapter, 1/4 wave antenna, power supply, and user guide.Brand | Shure #ad |
Manufacturer | Shure #ad |
Height | 3.78 Inches |
Length | 18.11 Inches |
Weight | 8.28 Pounds |
Width | 14.8 Inches |
Part Number | PA411 |
Model | PA411 |
Warranty | 2-year limited warranty. |
More information #ad